REGAD M3000 Electric Creasing & Edging Machine

  • $270.00In Stock

M3000 electric creasing & edging machine in two model versions by Ets P.Regad & Fils. Made in France.

No handles, no rests, no tips included. M3000 machine only. All Regad handles and tips are compatible with M3000 machine.

M3000 Package Includes:

US & Canada 110 - 120V model:

M3000 apparatus

Non-removable 2m (6.6ft) power supply flex with US plug

User’s manual

International 220 - 240V model:

M3000 apparatus

Non-removable 2m (6.6ft) power supply flex with EU plug

User’s manual

About REGAD tools:

There are a lot of ways of using REGAD tools in leathercraft.

With REGAD heating irons it is easy to polish leather surfaces, make professional edge finishing, paint decorative grooves on leather, make patterns. The variety of REGAD tools allows you to do a lot of specific work like cutting zipper, welding thread, smoothing watch strap holds. With REGAD heating tips it is easy to work with different types of leather and different shapes of patterns. For example, Burnishing Plate you can use while burnishing thick leather edges, FNMCR is used while creasing round leather corners, FC series irons generally is used while creasing tight curves.

REGAD tools are time-saving tools, which allow you to do the work much faster and with higher quality. You just need to turn on the Machine M3000 or M6000, which regulate the power, attach the handle to this Machine and screw the iron into handle. Regulate the power presicely to material you use and you can start working.

About M3000 machine: 

Leather Burning Machine Regad M3000. This apparatus transfers power and regulates the handle temperature. You can use only one handle while working with M 3000 Machine. The handle heats the iron. 

There is “on-off” power switch button and one LV output with 0V to 16V electronic controller on the front panel. M3000 comes with non-removable but durable 2m (6.6ft) power cable. This is a reliable well-made electric edging and creasing machine.

Specification:

1 LV output with 0V to 16V electronic controller.3A 48VA.

Metallic box apparatus dimensions:

Width: 145 mm (5.7”)

Depth: 130 mm (5.2”)

Height: 90 mm (3.5”)Weight: about 2.3kg (5.1lb)

US & Canada model - 110 - 120 V

International model - 220 - 240 V

One “On - Off” switching indicator light

Non-removable 2m (6.6ft) power supply flex with US plug (110 - 120 V US & Canada model)

Non-removable 2m (6.6ft) power supply flex with EU plug (220 - 240 V International model)

IMPORTANT: Before using the M3000 apparatus, check the indicator light “On - Off” switch button on the front is on “Off”

Safety Instructions: Only use this transformer with the electrical tools recommended by the supplier. Do not use this transformer for any other purpose. This transformer is designed for use indoors and in dry conditions only. While the transformer is on operation, the tool is hot. Be careful for the handling. When you stop working do not put the handle with the tool in contact with objects.

Instructions for use:

Preparing the unit for useconnect handle to low voltage apparatus out

putconnect transformer to mains supply

switch on by pressing the switch button at the front panel

Switching off the unit and changing the tool

cut off the power supply using the switch button at the front

make sure the tool is cold before unscrewing it

then screw on an other tool

Transformer safety mode

apparatus with low voltage 20V safety transformer

protected against secondary short circuits

in the event of malfunction of the holder or the removable heated tool, the transformer will switch to safety mode

Switch off the device and when it has cooled down replace the defective handle or tool. Press the circuit breaker green button on the front to switch unit on again.


Model: REGAD M3000
Brand: Ets P.Regad & Fils
Weight (kg): 2.408
Dimensions (mm): L0; W145; H90

Payment

All payments run through PayPal.

If you don’t use PayPal, you can pay with your credit card using Paypal.

We don’t collect you card data

Return

We offer 14 days return policy from the day you received your order.

All returns must be in the original non-damaged condition, including packaging and documentation.

You will get your refund within 3-4 working days from the moment we have received the returned item.

If item has been opened and/or used, a 30% restocking fee will be applied for a refund or an exchange.

Shipping cost (to and from buyer) will be charged for any refused shipping (include duties, taxes and customs fee if any).

Get to know more.


Shipping

We provide worldwide shipping. Tracking number is included.
The shipping price is calculated automatically at the checkout page. It depends on the weight, destination country and postal service.
Standard delivery time takes about 7-10 working days. In some cases, it can take a month.
Also  you can use express shipping by EMS. The delivery time is up to 5 days.

Custom duties
We’ll be glad to reduce the price of your order invoice to avoid payment of custom duties or to make it lower. Write us in “Wishes for order” section and we’ll try to help you.

Get to know more